Bale wrapper Z529 – self-loading
Bale wrapper Z529 is a machine suspended on a frontal or rear tractor TUZ hitch. It features bottom loading, which is completely automatic and is performed by special wrapping arms equipped with cylinders that rotate the bale. Wrapping process is performed automatically by a mechanical arm that rotates around the bale with a fixed roll feeder, which wraps bales rotating on the cylinders in layers of film. When wrapping is finished, the film is gripped and cut automatically by a hydraulic cutting device. After confirming with a push of a button, the bale is offloaded to the ground by parting of the cylinder equipped arms. The machine allows bales with 1200-1500mm diameter to be wrapped. The maximum weight of the bale cannot exceed 1000kg. Wrapping of one 1200mm diameter bale takes about two minutes. The machine’s compact size allows to easily traverse a hayfield or a barnyard. Because of the wrapper’s relatively small laden mass (780kg), a tractor with just 60kW output is required for transport and operation. As standard issue there is a 750mm film feeder, a hydraulic film cutter and a control panel. Optionally the machine can be equipped with a hydraulic bale positioning device, which allows the wrapped bale to be placed on its base.
- LIGHT AND FAST: the time needed to wrap one bale is only 2 minutes.
- SAFE: loading and offloading is performed automatically by wrapping arms
- DURABLE: equipment has a hydraulic drive which is efficient and reliable
- WELL-EQUIPPED: as standard the wrapper is equipped with valuable technical solutions
No. | Type | Z529 |
Bale characteristics | ||
1 | Wrapped bale diameter [mm] | 1200-1500 |
2 | Length of wrapped bales: | 1200 |
3 | Maximum bale mass [kg] | 1000 |
4 | Bale wrapping time [min] | about 2 |
5 | Film width [mm] | 750 |
Machine characteristics | ||
6 | Number of wrapping module rotations (bale Ø1200 mm) [rotation] | 16 |
7 | Loading mode | automatic with the help of wrapping arms |
8 | Offloading mode | automatic with the help of wrapping arms |
9 | Machine drive | Hydraulic |
Overall dimensions | ||
10 | Length [mm] | 2220 |
11 | Width [mm] | 1420 |
12 | Height [mm] | 2650 |
Tractor requirements | ||
13 | Tractor coupling mode | suspension |
14 | Connecting with the tractor: | TUZ three-point hitch |
15 | Tractor output [kW] | about 60 |
16 | Suggested tractor pump efficiency | 26 |
17 | Required power hydraulic pressure [MPa] | 14 |
18 | Maximum transport speed [km/h] | 15 |
Wrapper | ||
19 | Weight | 780 |
Electrical installation | ||
20 | Machine lighting | According to traffic rules |
21 | Electric installation voltage [V] | 12 |
Additional equipment | ||
22 | Automatic film cutter | V |
23 | Film roll feeder | V |
24 | Wrapping counter | V |
25 | Hydraulic bale positioning device | ● |
* Depending on the soil type
** Options available as complete sets only
Legend:
V standard
• optional