Bale wrapper Z237 self-loading

The Z237 self-loading bale wrapper features a rear loading grip for quick and effective work. The pickup and wrapping of bales is made in transit to the next bale or the bale dump. Not only is the solution handy, it also saves a lot of time. The machine comes with a film pickup and cutting device that requires the operator’s intervention only to replace the film roll.
When the wrapping process is finished, the bale can be placed standing with the loading arm. The bale wrapper is equipped with the advanced universal 500 and 750 mm wide film feeder.
The wrapper features a road wheel axle turning system to facilitate transport of the machine. The system also improves stability in operation. The machine features four rotary shafts that prevent the bales from slipping when being wrapped.
The direct drive transmission to a special slewing ring of the rotary table ensures silent operation of the machine and greater reliability when compared to chain transmission systems.
The machine is controlled from the tractor cab with the control levers of the three-section hydraulic system equipped with Bowden cables.
The bale wrapper comes with a programmable counting controller which displays the current bale wrap count, the operating time, the number of processed bales, and the average number of bales wrapped per hour. The controller can also process data separately for three farming fields.

• FASTER AND MORE EFFICIENT: The rear grab picks up and helps wrap the bale while driving by
• MINIMUM OPERATION: The process is fully automated for minimum operator’s intervention
• IMPROVED FILM SAFETY FROM DAMAGE: The wrapped bales are positioned on the ground to minimise the risk of film wrap damage
• ALL-ROUNDER: The feeder can work with 500 and 750 mm wider film rolls
• EASY TRANSIT AND STABLE OPERATION: The turning road wheels facilitate transport of the machine and improve its stability at work
• LOWER BALE SLIP: The four rotary shafts reduce the risk of bale slip during the wrapping process
• SILENT AND TROUBLE-FREE RUNNING: The slewing ring drive transmission works reliably and without noise
• SIMPLE CONTROLS: The machine is operated with the hydraulic control levers in the tractor cab
• EVERYTHING UNDER CONTROL: The bale wrap counting controller lets the operator monitor the film wrap count, see the running time, or the average number of bales wrapped per hour. The controller can be programmed to process data separately for three farming fields
• UNIVERSAL HITCHING SYSTEM: The machine can be coupled by the lower or upper hitch
• TPH COUPLING READY: The machine can be coupled with a tractor via the TPH (three point hitch)